Posted in

What materials are used for military service medals?

Hey everyone, thanks for dropping by. If you’ve ever stared at a veteran’s chest covered in those shiny, colorful military service medals and thought, “Wait, what even are these made of?” — well, you’re in the right spot. I’m the owner of a small medal materials supply company, and for the last 12 years, I’ve been the person sourcing, testing, and selling the exact stuff that goes into every one of those medals. It’s not just pretty metal; there’s a lot of thought (and a ton of old military specs) that go into picking every material. Let’s break it down like we’re grabbing coffee, no stuffy jargon here. Medal Materials

First off, let’s get one thing straight: military service medals aren’t mass-produced junk. Each branch has strict rules, and every material has to pass three big tests: it has to hold up through rain, snow, sweat, and even being banged around in a duffel bag; it has to look sharp for decades (no fading or turning green after a few years); and sometimes, it has to carry that little piece of history — like a bronze medal from a specific war, or a silver one for distinguished service. I’ve seen way too many new medal makers cut corners with cheap plating that chips after two parades, so that’s why I care about this.

Let’s start with the main base metal, the foundation of every medal. Most of the time, it’s not solid gold or silver (those are way too expensive for large batches). The go-to for like 70% of standard service medals is brass — red brass, specifically, not that cheap yellow stuff you find on door hinges. Wait, what’s red brass, you ask? It’s an alloy of copper and zinc, usually around 85% copper, 15% zinc. It’s soft enough to machine intricate details — that’s important for the little emblems, numbers, and edge text that don’t fade — and tough enough to not bend when you pin it on a uniform. I’ve had veterans tell me their grandfather’s WWII medals are still perfect, and that red brass is why. It doesn’t tarnish like pure copper, either, so it stays shiny until it gets plated.

But not all medals use brass. For things like combat medals or distinguished service honors, you’ll see nickel silver. That’s another copper alloy — copper, nickel, zinc — and it’s way harder than brass. I’ve used nickel silver for medals that get handed out to soldiers in combat zones, because it won’t scratch or bend if they’re carrying gear, or if it’s jostled against other medals in a rack. It also has a nice, silvery color right out of the gate, which cuts down on plating time for silver finishes. Some of the more modern unit medals use zinc, too — it’s cheaper, and when it’s coated with a thin layer of copper first, it takes plating really well. I usually only suggest zinc for bulk training awards, because it’s not as durable long-term, but it works for what those need.

Now the fun part: the plating. This is what gives medals their iconic colors — gold, silver, bronze, even those bright red, blue, and green enamel details. Let’s go through the most common ones. First, gold plating. Standard service medals that get awarded for length of service often use 24k gold flash plating — that’s a super thin layer of gold, just enough to make it look rich, but not so thick that it breaks the bank. For distinguished medals, we use heavier gold plating, sometimes 14k solid gold for high honors, but that’s only for small batches because it adds up fast. I once had a Navy commander order 50 solid gold medals for his crew after a mission, and we worked with the Navy’s logistics team to make sure it met their exact specs — no mistakes there.

Silver plating is another big one. Most Silver Star medals, or distinguished service medals, use sterling silver plate — that’s 92.5% silver, 7.5% copper, mixed into the plating so it’s durable. Wait, no, sometimes it’s solid sterling silver for really high honors, but again, that’s only for small orders. I’ve had to rush silver plating before a big memorial day event, and I learned early on that cheap silver plating will tarnish so bad the next year that it looks like a penny. So we use a proprietary clear coat on all our silver finishes to prevent that. That clear coat is a game changer — veterans can wear their medals to a wedding, take them off, and they still look shiny a month later.

Bronze plating is straightforward, but don’t confuse it with the cheap bronze you get on souvenir statues. Our bronze plating for medals is high-purity copper, treated to that classic dark, warm bronze color that doesn’t turn green (verdigris, that’s what it’s called — gross stuff, makes medals look old and gross). We also have a special “antique bronze” finish for some commemorative medals, which is just a little extra dark, gives it that vintage feel without being fake. I’ve made a lot of Vietnam-era commemorative medals using that bronze, and veterans tell me it looks exactly like the ones they wore back then, which is huge for us.

Now, those colorful details on medals — the red stripes, blue stars, green emblems — that’s enamel, and it’s not just paint. Military medals use two types: hard enamel and soft enamel. Hard enamel is the tough stuff — it’s fused to the metal base at super high temps, so it’s scratch-proof and can stand up to being scrubbed if it gets dirty. That’s what we use for combat medals, because a soldier might wipe their medal off with a rag after a deployment, and it won’t chip. Soft enamel is a little cheaper, and it’s more for decorative details, but we only suggest it for non-combat awards like unit citations, because it’s softer and can scratch if it’s banged around. I once had a client try to use soft enamel for a combat medal, and I talked them out of it — a few months later, they sent a picture of a chipped red stripe, and they were glad they switched to hard enamel.

Wait, there are a few other materials you might not see right away. Some modern medals are using stainless steel, especially for Air Force and Space Force awards. It’s super rust-proof, which is perfect for pilots who are out in the elements, or space personnel dealing with weird temps. It’s also magnetic, which makes it easy to attach to uniform magnetic backs — no more bending pins through cloth. I’ve been testing stainless steel plating for the last year, and it’s been holding up way better than brass in extreme weather. We also use anodized aluminum for some lightweight training medals — cadets love it because it’s light, so it doesn’t pull on their uniform all day during parades.

Let me give you a real example to make this concrete. Last year, we had an order for 200 Army Good Conduct medals. The specs were clear: red brass base, 24k gold flash plating, hard enamel blue stars on the edge. We tested a small batch first, dipped it in salt water for a week (that’s the military’s corrosion test, by the way), and it didn’t tarnish at all. We delivered it a week ahead of schedule, and the logistics team told me the medals are still going strong, no issues. That’s the stuff I live for — knowing that the materials we supply make a medal that a veteran will keep on their wall for 50 years.

I should also mention what we don’t use. No cheap tin plating, no plastic bases, no fake gold. A lot of small, random medal makers cut corners with that, and it’s obvious — those medals turn green, chip, or fade after a year. We only work with the exact materials the branches specify, so every medal we supply meets military specs, no exceptions. I’ve had military inspectors come through our warehouse, and they never send any material back, which is the highest compliment we can get.

Wait, a quick pro tip if you’re a veteran or someone buying medals as a gift: don’t buy medals from random eBay sellers. Ask what the base material is, ask about the plating. If someone says “brass” but won’t specify if it’s red brass, that’s a red flag. A good medal maker will be upfront about their materials, just like we are. We post all our material specs on our website (no links, just saying) so anyone can check.

Now, if you’re a medal maker, a veteran’s organization, or someone who needs bulk medals for an event — listen, we’ve got your back. We have all these materials in stock, we can work with custom orders, we can test batches to make sure they meet military specs, and we don’t charge extra for rush orders when it’s for a good cause. I’ve been in this game long enough to know that medals are more than just metal — they’re a piece of someone’s service, their time in the military, the friends they made, the missions they completed. That’s why we don’t mess around with cheap stuff.

If you’re looking to source reliable, mil-spec medal materials, we’re the team you want to talk to. We can walk you through any questions you have, from base metals to plating to enamel finishes, and we can get samples to test before you commit to a big order. No pressure, no salesy nonsense, just honest advice and good materials.

Oh, and one last thing: I get asked all the time if we work with commemorative medals too, not just active duty military. Yep, we do. We supply materials for veterans’ memorials, unit reunion medals, even custom medals for police and fire departments — same standards, same care, because those people deserve good materials too.

So that’s the gist of it. Military service medals are made from tough, durable, history-rich materials — not just random metal. It’s a mix of tradition (red brass, sterling silver) and modern innovation (stainless steel, anodized aluminum) designed to last a lifetime. If you have questions about sourcing materials, need samples, or just want to chat through an order, reach out to us. We’re here to help make sure every medal that gets made is as good as the service it represents.

Baseball Medals References
U.S. Army Military Specifications for Medal Materials (MIL-M-1395)
U.S. Navy Bureau of Naval Personnel Medal Production Guidelines
Military Surface Technology Center Corrosion Resistance Standards for Medals
Brass Alloy Association: Properties of Red Brass for Medals
Enamel Manufacturers Association: Hard vs. Soft Enamel for Military Insignia


Global Art Gifts Co., Ltd.
Global Art Gifts Co., Ltd. is one of the most professional medal materials manufacturers and suppliers in China. We are committed to providing high quality customized products with competitive price. Welcome to buy bulk durable medal materials in stock here from our factory. Also, pricelist is available.
Address: Hushan Tech Park, Shiwan, 516127 Huizhou China
E-mail: nicole@globalartgifts.com
WebSite: https://www.globalartgift.com/